Driveway and concrete cleaning in Melbourne's west
Concrete, pavers, exposed aggregate, asphalt. Years of grime, oil stains, tyre marks, and mould - properly cleaned, surface-safe, restored.
How to clean a concrete driveway in Melton (and why DIY usually fails).
Concrete driveways collect oil, rubber, mould, and dust over years of use. The hardware-store electric pressure washer most people own simply doesn't have the flow rate to lift that buildup - you end up streaking the concrete and missing 60% of the grime.
We use commercial-grade equipment with rotating surface cleaners that strip the grime evenly without leaving wand marks or hot spots. The result is uniform, the surface stays intact, and the work is done in hours instead of an entire weekend.
Our 4-step process
Pre-treat stains
Oil stains, tyre marks, and rust spots get spot-treated with degreaser and given dwell time before the main clean.
Surface cleaner pass
Rotating surface cleaner strips the bulk of the grime evenly - no wand marks, no hot spots, no streaking.
Edge + corner detail
The surface cleaner can't reach edges and corners - we go back over those by hand with a wand attachment for a uniform finish.
Final rinse
Clean-water rinse to flush all loosened grime and any remaining detergent off the surface and into the drain.
Different surfaces, different settings.
Each surface needs a different approach. Get it wrong and you damage the surface or leave it half-clean. We adjust pressure, nozzle, and chemistry for each one:
- Plain concrete (slabs, slabs with broom finish)
- Exposed aggregate (more delicate - softer pressure)
- Pavers (lock-blocks, brick, stone)
- Asphalt (lower pressure, surface-protective)
- Stamped or coloured concrete (sealing-aware approach)
- Tile and stone (wet-area appropriate technique)
What does driveway cleaning cost?
Driveway cleaning is usually quoted on the area and the condition. The biggest cost drivers are:
- Surface area in square metres
- Surface type (plain concrete vs exposed aggregate vs pavers)
- Condition (light grime vs years of stains)
- Whether sealing or re-coating is requested afterwards
- Access - easy reach vs tight courtyard
hipages and Service.com.au put most residential driveway cleans across Australia between $150 and $450. We'll measure your driveway and give you an exact quote - no surprises.
See the difference
Real driveway and concrete results from Melbourne's west
Frequently asked questions
Other services we offer
Pressure Washing
Driveways, pavers, paths, and house exteriors. We remove years of grime, mould, and buildup.
House Washing & Soft Wash
Soft wash for weatherboard and render. Pressure wash for brick and concrete. We choose what your home actually needs.
Deck Restoration
Stripping, sanding, and sealing new and weathered timber decks. Properly prepared for a finish that lasts.
Get a free quote
Tell us a bit about your job and we'll get back to you fast - usually same day. No obligation, just friendly advice and honest pricing.
